BreatheSafe INPRESS TS User Manual page 2

Controlled document: M-0002B I N P R E S S T S
Revision: B
Issue Date: 30 August 2021
C on te nt s
1 USER GUIDE
1 Key Features
2 WARNING
3 CONTROLLER APPEARANCE
4 FUNCTIONS
5 OPERATING INSTRUCTIONS
5 Enter Setup Mode
6 Change Date and Time
6 Change Pressure Setpoint
6 Change ALarm Setpoint
7 Enable / Disable Buzzer
7 Change Alarm DELAY Settings
7 Change Service Reminders
8 Calibrate Zero Sensor
8 Reset Data Log
8 Test Inputs Option
9 TECHNICAL DETAILS
9 Map of Functions
11 General Arrangement
12 Connector Pinout Details
14 Installation
15 Fan Speed Control Output
15 Mounting
15 Supply Power
15 Calibration
15 Control Override
16 Data Logging Information
20 BREATHESAFE WARRANTY
21 CONTACT US
© BREATHESAFE 2021
WARNING
THE PRESSURISATION SYSTEM
DESCRIBED IN THIS MANUAL HAS
THE FOLLOWING AREAS WHICH
MAY BE DANGEROUS IF NOT
TREATED WITH GREAT CARE.
WEAR CORRECT PERSONAL PROTECTIVE EQUIPMENT
WHEN CLEANING AND SERVICING THIS UNIT DUE TO
INHALEABLE AND RESPIRABLE HAZARDOUS PARTICALS
AND FIBRES WHICH MAY BE CAUGHT BY ALL STAGES OF
Controlled document:
FILTRATION DURING NORMAL UNIT OPERATION.
Issue Date:
THE ELECTRICAL POWER SYSTEM IS SUPPLIED BY 12V
DC OR 24V DC. NO WORK SHOULD BE CARRIED OUT
ON THE PRESSURISER SYSTEM WITHOUT THE CORRECT
ELECTRICAL SAFETY MEASURES BEING TAKEN AND ALL
RELEVANT CIRCUIT BREAKERS OPENED TO ISOLATE THE
CIRCUIT.
THE PRESSURISER HAS VARIOUS TYPES OF ROTATING
EQUIPMENT INSTALLED. ENSURE ALL SAFETY GUARDS
ARE IN PLACE WHILE THE SYSTEM IS RUNNING.
PAGE 2 www.breathe-safe.com.au Delivering Innovative Climate Solutions Worldwide