BreatheSafe INPRESS TS User Manual page 18

Controlled document: M-0002B I N P R E S S T S
Revision: B
Issue Date: 30 August 2021
C on te nt s
1 USER GUIDE
1 Key Features
2 WARNING
3 CONTROLLER APPEARANCE
4 FUNCTIONS
5 OPERATING INSTRUCTIONS
5 Enter Setup Mode
6 Change Date and Time
6 Change Pressure Setpoint
6 Change ALarm Setpoint
7 Enable / Disable Buzzer
7 Change Alarm DELAY Settings
7 Change Service Reminders
8 Calibrate Zero Sensor
8 Reset Data Log
8 Test Inputs Option
9 TECHNICAL DETAILS
9 Map of Functions
11 General Arrangement
12 Connector Pinout Details
14 Installation
15 Fan Speed Control Output
15 Mounting
15 Supply Power
15 Calibration
15 Control Override
16 Data Logging Information
20 BREATHESAFE WARRANTY
21 CONTACT US
© BREATHESAFE 2021
If required, you may choose
to save the COM port
settings. Go to Settings and
click save setup.
Hint: From the drop down
menu click on the Save Setup.
Controlled document:
Issue Date:
Name the file and save it.
The next time a download is
required you may restore the
setup and COM PORT settigns
will be loaded ready to
download the data file from
the TLUCPMTS unit.
PAGE 18 www.breathe-safe.com.au
From drop down menu click on
the Save setup.
Click Restore setup.
Choose the file name you have
already saved.
Delivering Innovative Climate Solutions Worldwide