External Data List - Icom MR-1000RII Instruction Manual

The following external bearing, speed, position and way point data is (are) required , when you use the radar func-
tions.
FUNCTION
HEAD UP
COURSE UP
NORTH UP
TRUE MOTION
SPEED DISPLAY
HEADING BEARING
WAY POINT
OWN VECTOR
MOB
ATA
VRM/PI/WPT/MOB estimated
time of arrival
MAGNETIC VARIATION (AUTO)
* 1 OG; Over ground, TW; Through the water
* 2 NMEA1 and NMEA2 connectors; See p. 24
• "HDT", "HDM", "RMC", "GGA", "GLL", "VTG", "WPL", "GNS" and "BWC" are SENTENCES of the NMEA0183.
• If BRG INPUT is set to "GPS", "RMC" of NMEA2 connector or COG (Course Over the Ground) of "VTG" a bow it
receives as a direction, even if there is no direction information (compass etc.) in NMEA1 connector, the screen
display of the North rise etc. is possible.
However, direction accuracy falls when the speed of a ship is set to 2 or less kts, or when exceeding 3 kts a bow
it does not receive as direction data. Moreo, the influence of measurement position accuracy or a current an actual
bow it may differ from a direction.
2
NMEA1*
"HDT", "HDM"
N+1, AUX
DISPLAY BEARING
HU
CU Required
NU Required
1
OG* TM Required
1
TW* TM Required
1
OG* SOG
1
TW* STW
HDG Required
WPT Required
1
OG* Required
1
TW* Required
MOB Required
1
OG* ATA Required
1
TW* ATA Required
1
OG*
1
TW*

EXTERNAL DATA LIST

EXTERNAL DATA INPUT
NMEA2*
"RMC", "GGA", "GLL", "VTG", "WPL", "BWC", LOG, "GNS"
SPEED POSITION
"RMC", "GGA" or "GLL", "GNS"
LOG
"RMC" or "VTG"
LOG
"RMC", "GGA" or "GLL", "GNS"
"RMC" or "VTG"
LOG
"RMC", "GGA" or "GLL, "GNS"
"RMC" or "VTG"
LOG
"RMC" or "VTG"
LOG
"RMC" or "VTG"
15
2
WAY POINT
"WPL" or "BWC"
39