I Ata (Automatic Tracking Aid); I Int. Setting - Icom MR-1000RII Instruction Manual

I ATA (Automatic Tracking Aid)

A T A MENU
A T A OFF
No.DISP OFF
TRUE
VECT
OWN VECT OFF
ALARM OFF
CPA LIMIT 1.0NM
TCPA LIMIT 1 MIN
D ATA
• OFF : Turn the ATA function OFF.
• ON : Turn the ATA function ON.
D No.DISP
• OFF : Non display any mark number.
• Sel : Display the selected mark number
only.
• ALL : Display all mark numbers.
D VECT
• TRUE : Select the true vector mode.
• REL : Select the relative vector mode.
D OWN VECT
• OFF : Non display the own ship vector.
• ON : Display your own ship's vector.
D ALARM (CPA/TCPA)
• OFF : Turn the alarm function OFF.
• ON : Turn the alarm function ON.
D CPA* LIMIT
• 0.1 to 10.0NM : Set the CPA (Closest Point of Ap-
proach) limit with [
D TCPA* LIMIT
• 1 to 60MIN : Set the TCPA (Time to CPA) limit time
with [
*CPA/TCPA: Closest Point of Approach and Time to Clos-
est Point of Approach limit is defined by the observer to
given warning when a target or targets are close to
within those limits from your own ship.
ON
SEL ALL
REL
ON
ON
.
.

I INT. SETTING

INT. SETTING
MAG VAR AUTO
BRG INPUT NMEA
SPD INPUT GPS
TX INH START
TX INH ANGLE
SAVE TIME 1M
SYMBOL
1
CHARACTER 1
KEY ILLUM 1
D MAG VAR
• AUTO : Revise magnetic variation automatically.
NOTE: NMEA data is required. NEVER select
"AUTO" without NMEA data, incorrect varia-
tion data may entered. (p. 39)
• MANUAL : Revise magnetic variation manually.
• Push [ to select [MANUAL], then push
[ . Set the revise value with [
Push [ or [MENU] to abort the menu.
D BRG INPUT
• NMEA : NMEA0183 bearing data format.
• N+1 : N+1 data format.
• AUX : Other format.
• GPS : Reads NMEA0183 COG format data as
HDG format.
D SPD INPUT
• GPS : Use the GPS NMEA speed data.
• LOG : Use the speed sensor data.
D TX INH START
• 0 to 359° : Push [ to enter the start point of the
TX inhibit area.
D TX INH ANGLE
• 0 to 90° : Push [ to enter the TX inhibit area.
D SAVE TIME
• 1M, 6M, 15M or 30M
: Select the stand by time during save
mode.
* The radar for TX interval scan is fixed at 10 revolutions.
D SYMBOL
• 1/2/3 : Select the symbol brightness.
D CHARACTER
• 1/2/3 : Select the character brightness.
D KEY ILLUM
• 1/2/3/4 : Select the key illumination brightness.
3
MENU
MANUAL
7.2 ˚ W
N+1 AUX GPS
LOG
0 ˚
0
˚
6M 15M 30M
2 3
2 3 BRILL
2 3 4
.
7