Function Display - Icom IC-M1 Instruction Manual

1
PANEL DESCRIPTION

Function display

LOW POWER INDICATOR (p. 7)
• Appears when low power is selected.
• Blinks when extra low power is selected.
CALL CHANNEL INDICATOR (p. 5)
Appears when a call channel is selected.
BUSY INDICATOR (p. 7)
Appears when receiving a signal or when
the squelch opens.
TRANSMIT INDICATOR (p. 7)
Appears while transmitting.
TAG CHANNEL INDICATOR (p. 12)
Appears when a tag channel is selected.
CHANNEL INDICATORS (pgs. 5, 6)
Indicate whether a U.S.A., international,
Canadian or weather channel is selected.
CHANNEL NUMBER READOUT
• Indicates the selected operating channel
number. (pgs. 5, 6)
• In SET mode, indicates the selected con-
dition. (pgs. 13, 14)
3
TX BUSY CALL LOW BATT
ALT SCAN
TAG
DUAL TRI
WX
DUP SCRM
USA
INT
CAN
LOW BATTERY INDICATOR (p. 15)
Blinks when the battery voltage drops to
approx. 6 V or below. The attached battery
pack requires charging in this case.
WEATHER ALERT INDICATOR (p. 14)
Appears while the weather alert function is
activated; blinks when alert tone is received.
LOCK INDICATOR (p. 6)
Appears while the lock function is activated.
SCAN INDICATOR (pgs. 12, 14)
Blinks while scanning; appears when the
auto scan function is in standby.
DUALWATCH/TRI-WATCH INDICATORS
"DUAL" appears during dualwatch; "TRI" ap-
pears during tri-watch. (p. 10)
SCRAMBLER INDICATOR (p. 8)
Appears when the optional voice scrambler
is activated.
DUPLEX INDICATOR
Appears when a duplex channel is selected.
SCRAMBLE CODE READOUT (p. 8)
Shows the scrambler code while setting.