Icom IC-M1 Instruction Manual page 17

D Weather alert function
An NOAA broadcast station transmits an weather alert tone
before an important weather information. When the weather
alert function is turned ON, the transceiver detects the alert,
then flashes the "ALT" indicator until the transceiver is oper-
ated. The previously selected (used) weather channel is
checked in any time during standby or while scanning.
• "ALT" appears when the function is set ON.
WX
Weather alert function OFF (default)
D Scan type selection
The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring channel 16.
Normal scan (default)
"AL"
"SC"
Priority scan
D Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal is being received
on channels except for channel 16.
Scan timer OFF (default)
D Auto scan function
While in standby, this function automatically starts the se-
lected scan (normal or priority scan) 30 sec. after operation.
• "SCAN" appears when the function is turned ON.
NOTE: The transceiver has a power save function but the
power save function does not function when the auto scan
function is in use.
Auto scan OFF (default)
SET MODE
"St"
"At"
SCAN
5
14