Call Channel Programming; Automatic Backlighting - Icom IC-M1 Instruction Manual

2
BASIC OPERATION

Call channel programming

The call channel key is used to select channel 9, however,
you can program your most often-used channels in each
channel group for quick recall.
1 Push [ U/I/C] for 1 sec.
CH/WX•
several times to select the de-
sired channel group (USA, INT,
CAN) to be programmed.
2 Push [
9] for 1 sec. to select
16•
the call channel of the selected
channel group.
- "CALL" and call channel number
appear.
3 Push [ 9] again for 3 sec.
16•
(until long beep changes to 2
short beeps) to enter call chan-
nel programming condition.
- Call channel number and channel
group to be programmed flashes.
9
4 Rotate the channel selector to
TAG
5 Push [16
USA
CALL
TAG
USA
This function is convenient for nighttime operation. The auto-
CALL
matic backlighting can be activated in SET mode. (p. 13)
TAG
USA
• Push any key except for [PTT] to turn the backlighting ON.
select the desired channel.
] to program the dis-
•9
played channel as the call
channel.
- The call channel number and
channel group stop flashing.

Automatic backlighting

- The backlighting is automatically turned OFF 5 sec. after opera-
tion.
- Push [SQL] to turn the backlighting ON without changing the op-
erating condition.
CALL
TAG
USA
CALL
TAG
USA