I Timer Set Mode; I Miscellaneous (Others) Set Mode - Icom IC-756PROII Instruction Manual

9
SET MODE

I Timer set mode

This item sets the current time for the built-in 24-hour
clock.
See p. 62 for details.
This item sets the timer functions ON and OFF.
When the power-ON timer or the power-OFF timer is
used, "ON" must be selected in this item.
See p. 62 for details.
This item sets the power-on time.
See p. 63 for details.
This item sets the power-off period for automatic shut-
down after the power-on timer has turned power ON.
See p. 63 for details.

I Miscellaneous (others) set mode

This item is used for a simple frequency check of the
transceiver.
See p. 77 for calibration procedure.
Turn the calibration marker OFF after checking the
frequency of the transceiver.
A beep sounds each time a switch is pushed to con-
firm it. This function can be turned OFF for silent op-
eration.
The volume level can be set in level set mode. (p. 65)
A beep sounds when an operating frequency enters
or exits an amateur band. This functions independent
of the confirmation beep setting (above).
The volume level can be set in level set mode. (p. 65)
68
Push [(F-4)SET] to enter the time.
The timer functions can be
operated. (default)
Push [(F-4)SET] to enter the time.
Push [(F-4)SET] to enter the time.
Calibration marker ON
Confirmation beep ON
(default)
Band edge beep ON
(default)
The timer functions cannot
be operated.
Calibration marker OFF
(default)
Confirmation beep OFF
Band edge beep OFF