Icom IC-756PROII Instruction Manual page 42

5
RECEIVE AND TRANSMIT
I Digital voice recorder
• Recording a message for transmit
To transmit a message using a voice recorder, record
the desired message in advance as described below.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [(F-2)VOICE] to call up the voice recorder
screen.
e Push [(F-2)MIC REC] to select the voice memory
recording screen.
r Push the desired memory channel switch,
[(F-1)T1] – [(F-4)T4], for 1 sec. to start recording.
• Speak into the microphone without pushing the [PTT]
switch.
• Previously recorded contents are cleared.
t Adjust the [MIC GAIN] control so that the [REC
LEVEL] indicator reads within 100%.
y Push the selected memory channel switch,
[(F-1)T1] – [(F-4)T4], again to stop recording.
• Recording is automatically terminated when the total
time of recorded messages, T1–T4, becomes 90 sec.
u Push [EXIT/SET] twice to exit the voice memory
screen.
• Confirming a message for transmit
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [(F-2)VOICE] to call up the voice recorder
screen.
e Push [(F-2)MIC REC] to select the voice memory
recording screen.
40
(continued)
r Push the desired memory channel switch,
[(F-1)T1] – [(F-4)T4], momentarily to start playback
and confirmation.
t Push the selected memory channel switch,
[(F-1)T1] – [(F-4)T4], again to stop playback if de-
sired.
y Push [EXIT/SET] twice to exit the voice memory
screen.
• Programming a memory name for
transmit
Memory channels can be tagged with alphanumeric
names of up to 20 characters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
and spaces can be used. (See step t below.)
q Record a message as described at left.
w Call up the voice memory recording screen as de-
scribed in steps q to e at left.
e Push [(F-5)NAME] to enter memory name edit
condition.
• A cursor appears and blinks.
r Push [(F-5)T1..T4] several times to select the de-
sired voice memory.
Selected
character
Character
group
keys
t Input the desired character by rotating the tuning
dial or by pushing the band key for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [etc] to toggle numerals and symbols.
• Push [(F-1)Ω] or [(F-2)≈] for cursor movement.
• Push [(F-3)DEL] to delete the selected character.
• Push [(F-4)SPACE] to input a space.
• Pushing the transceiver's keypad, [0]–[9], can also
enter numerals.
y Push [EXIT/SET] to input and set the name.
• The cursor disappears.
u Repeat steps r to y to program another voice
memory's name, if desired.
i Push [EXIT/SET] twice to exit the voice memory
screen.
_
)