Icom IC-756PROII Instruction Manual page 75

I Miscellaneous (others) set mode
This item sets the external keypad capability and
function.
For your information
The following diagram shows the equivalent circuit of
an external keypad and connects to the pin 3 and
pin 7of the [MIC] connector (p. 9).
4.7kΩ 2.2kΩ 1.5kΩ 1.5kΩ
± 5% ± 5% ± 5% ± 5%
S4 S3 S2 S1
(T4/M4) (T3/M3) (T2/M2) (T1/M1)
USER EXTERNAL KEYPAD
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and "Auto" are available.
When "Auto" is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-756PROII's address is 64h.
When 2 or more IC-756PROII's are connected to an
optional CT-17 -
CI V LEVEL CONVERTER
ing dial to select a different address for each IC-
756PROII in the range 01h to 7Fh.
Transceive operation is possible with the IC-
756PROII connected to other Icom HF transceivers
or receivers.
When "ON" is selected, changing the frequency, op-
erating mode, etc. on the IC-756PROII automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
When connecting the IC-756PROII to the IC-735 for
transceive operation, you must change the operating
frequency data length to 4 bytes.
• This item must be set to "ON" only when operating the
transceiver with the IC-735.
To [MIC] connector pin e
To [MIC] connector pin u
, rotate the tun-
(continued)
Pushing one of external keypad
switches, transmits the desired voice
memory during a phone mode (SSB,
AM or FM), or memory keyer contents
during CW mode operation.
Pushing one of external keypad
switches, transmits the desired voice
memory contents during a phone
mode operation.
Pushing one of external keypad
switches, transmits the desired keyer
memory contents during CW mode
operation.
External keypad does not function.
(default)
Auto baud rate
(default)
Address of 64h
(default)
Transceive ON
(default)
4 bytes of frequency data
9
SET MODE
19200 bps
Address of 7Fh
Transceive OFF
5 bytes of frequency data
(default)
73