Icom IC-756PROII Instruction Manual page 6

2
PANEL DESCRIPTION
I Front panel
EIVER
6PRO™
NB NR
BAL NR
COMP BK-IN DELAY KEY SPEED
!7
!7 COMPRESSION LEVEL CONTROL [COMP] (p. 37)
Adjusts the speech compression level in SSB.
Compression
level decreases
!8 SEMI BREAK-IN DELAY CONTROL [BK-IN DELAY]
Adjusts the transmit-to-receive switching delay time
for CW semi break-in operation.
Short delay for
high speed keying
(2 dot)
!9 ELECTRONIC CW KEYER SPEED CONTROL
[KEY SPEED] (p. 43)
Adjusts the internal electronic CW keyer's speed.
• 6 wpm (min.) to 60 wpm (max.) can be set.
Slow
@0 MODE SWITCHES
Selects the desired mode. (p. 25)
• Announces the selected mode when an optional UT-102
is installed. (pgs. 71, 74)
➥ Selects USB and LSB mode alternately.
SSB
➥ Selects SSB data mode
when pushed for 1 sec. in SSB mode.
➥ Selects CW and RTTY mode alternately.
CW/RTTY
➥ Switches CW and CW-R
mode when pushed for 1 sec. in CW
mode.
➥ Switches RTTY and RTTY-R
verse)
RTTY mode.
4
(continued)
@9
F-1 F-2 F-3
SSB CW/RTTY AM/FM
!8 !9 @0
Compression
level increases
COMP
Long delay for
slow speed keying
BK-IN DELAY
(13 dot)
Fast
KEY SPEED
(USB-D, LSB-D)
(CW reverse)
(RTTY re-
mode when pushed for 1 sec. in
@8 @7 @6
1
1.8
SPLIT
4
10
DUAL
WATCH
7
21
CHANGE
GENE ¥
VFO/
MEMO
MP-W
MAIN/
SUB
RX
TX
F-4 F-5
REC/PLAY
FILTER EXIT/SET
@1 @2 @3 @4
➥ Selects AM and FM mode alternately.
AM/FM
➥ Selects AM/FM data mode
when pushed for 1 sec. AM/FM mode.
@1 LCD FUNCTION SWITCHES [F-1]–[F-5]
Push to select the function indicated in the LCD dis-
play above these switches.
• Functions vary depending on the operating condition.
@2 FILTER SWITCH [FILTER] (p. 29)
➥ Selects one of 3 IF filter settings.
➥ Enters the filter set mode when pushed for 1 sec.
@3 EXIT/SET SWITCH [EXIT/SET]
➥ Exits from a set mode, etc. when pushed.
➥ Selects the set mode screen when pushed for
1 sec. (p. 64)
@4 REC/PLAY SWITCH [REC/PLAY] (p. 38)
➥ Play back the recorded audio in the channel R4
of the voice memory when pushed.
➥ Records the receiving signal contents into the
channel R4
when pushed for 1 sec.
@5 TUNING DIAL (p. 23)
Changes the displayed frequency, selects set mode
items, etc.
@6 MAIN/SUB SWITCH [MAIN/SUB]
Selects access to the main or sub readout.
• The sub readout frequency is displayed in outline or
mesh font. The sub readout functions only during split
operation or dualwatch.
@7 VFO/MEMORY SWITCH [VFO/MEMO]
➥ Switches the selected readout operating mode
between the VFO mode and memory mode when
pushed. (pgs. 22, 51)
TWIN PBT
2 3
3.5 7 Y
5 6
14 18 Z
8 9
24 28 MW
PBT CLR NOTCH
F-INP
0
50 M-CL
ENT
NOTCH CW PITCH
MP-R TS
XFC
LOCK
RIT TX CLEAR
RIT/ TX
LOCK/SPEECH
@5
(AM-D, FM-D)
of the voice memory
(max. 15 sec.)