Standard Install - Fisher & Paykel DD60STX6HI Installation Manual

STANDARD INSTALL

C
A
D
B
CABINETRY DIMENSIONS
A Minimum inside height
B Inside width
C Minimum inside depth*
D Minimum toe kick height**
*including 18mm door panels on adjacent cabinetry
**when venting through the same or adjacent cabinet. Refer to 'External venting preparation' for more information.
***for more information on service requirements, refer to 'Plumbing & electrical considerations' and 'Cabinetry preparation'.
8
Connections can
be located in an
adjacent cabinet
on either side of
the DishDrawer™
Dishwasher***
ISOMETRIC
CABINETRY
The assisted opening unit should be installed at the centre front of the cavity. For more
information on assisted opening installations, refer to the guidance provided with the unit
or fisherpaykel.com
B
A
E
MM CABINETRY DIMENSIONS
456 A Minimum inside height*
600 B Minimum inside height from top of spacer blocks
578
C Inside width
100
D Minimum inside depth**
E Minimum toe kick height***
*including an 18mm high spacer and two 55mm high spacer blocks
**including 18mm door panels on adjacent cabinetry
***when venting through the same or adjacent cabinet. Refer to 'External venting preparation' for more information.
****for more information on service requirements, refer to 'Plumbing & electrical considerations' and 'Cabinetry preparation'.
ASSISTED OPENING INSTALL
D
C
ISOMETRIC
Assisted opening units can be purchased separately.
Connections can
be located in an
adjacent cabinet
on either side of
the DishDrawer™
Dishwasher****
MM
511
456
600
578
100