Table of Contents
Advertisement
CONTINUOUS TOE KICK PANEL
1
2
14
INSTALL TOE KICK
Align toe kick to product and ensure all
door swing clearances have been met.
Fit panel to surrounding cabinetry
CUSTOM TOE KICK PANEL
1
2
3
4
Mark the pilot hole locations for each
bracket. Measure the centre of the
panel and mark 237mm to each side.
To determine the height of the
brackets, measure the height of the
lowest bracket hole against the toe
kick panel.
Ensure brackets are oriented correctly
before fitting to the panel using 2 x
screws per bracket.
Measure the toe kick depth:
toe kick recess
panel thickness
toe kick depth
-
=
x
y
z
Use Z to determine which tooth to
bend back on each toe kick bracket.
Align the brackets to the slots on the
product and slide into place.
Advertisement
Table of Contents
