Fisher & Paykel WM1490P Installation Manual/User Manual page 36

Keylock
This option enables you to deactivate the buttons on the display panel, except for the
'Power' and 'Keylock' buttons. This prevents accidental button presses.
To turn Keylock mode ON or OFF when the washer is powered on:
Touch and hold the
● ●
Note: when activated, the light above the
If Keylock mode is activated and the machine is powered off:
To turn your washer on, press the 'POWER' button, then touch and hold the
● ●
for two seconds. Select your wash cycle, options and then touch
To turn the washer off at anytime when keylock is activated simply press the 'POWER'
● ●
button.
Delay Start
The 'Delay Start' option enables you to delay the start of the wash cycle from between
5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then
hourly up to 12 hours. This can be useful to time your washing to finish when you arrive
home from work, or to start once you have finished in the shower. Some stain removers
also require you to spray them on then leave for several minutes, before washing.
Your washer will wait for the selected time then start without you having to wait or
remember to start your machine.
To programme a 'Delay Start' time, simply touch the 'More'
delay time and 'Less'
to confirm your selection and start the countdown. Once started, the time will count
down on the digital display screen in 1 minute increments, the 'Delay Start' light will
flash and the
Note: if you hold the 'More'
after every half a second (more convenient than touching the button repetitively).
To remove a 'Delay Start' time once it is counting down, simply touch
'Less' button to decrease the time to zero. Touch
Note: we suggest that you avoid using 'Delay Start' for damp, non-colourfast items as
this may cause dye run to occur. We also recommend you use powder detergent when
you use the 'Delay Start' function (WM1280J model only).
34
WASH CYCLE OPTIONS
button for 2 seconds.
button to decrease the time or turn 'Delay Start' off. Touch
light will stop flashing and turn on solid.
button down, the time displayed on the screen will increase
button is illuminated.
button to increase the
to start the cycle immediately.
button
to start the cycle.
, then touch the