Download Print this page

Fisher & Paykel WM1490P Installation Manual/User Manual page 42

Front loading clothes washer
Hide thumbs Also See for WM1490P:

Advertisement

PROBLEM
Too many
suds.
Door is
locked.
Door is open.
40
BEFORE YOU CALL FOR SERVICE
DISPLAYED AS
WHAT TO DO
Machine will stop and flash
while waiting for suds to dissipate. The machine
will not beep during this time. After 10 minutes the
machine will automatically restart. At any point during
that 10 minutes you can touch
machine, but it is recommended that the machine be
left to restart automatically.
Check you are using a suitable detergent.
Check you are not overdosing the detergent.
Check the standpipe height for the drain does not
exceed 1200mm.
The temperature in the drum is over 60°C therefore
it is not safe to open the door. Wait until the
temperature drops below 60°C.
Check the water level in the drum. If the level is above
the bottom of the door seal, the door cannot be
opened. Use the 'Add a Garment' button if you wish
to add or remove items (WM1490F, WM1490P and
WM1480P models only).
If the drum is still moving, wait for it to stop before
attempting to open the door.
Close the door fully and touch
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in
the drum and that protruding items are not stopping
the door from closing.
for 10 minutes
to restart the
.

Advertisement

loading

This manual is also suitable for:

Wm1490fWm1480pWm1280j