Customising Drying Cycle - Fisher & Paykel DE6060M Installation Manual/User Manual

Vented clothes dryer
Hide thumbs Also See for DE6060M:
Table of Contents

Advertisement

Delay Start (DE7060M, DE6060M, DE5060M and DE5060MU models only)
The 'Delay Start' option enables you to delay the start of the drying cycle from between
5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then
hourly up to 12 hours. This can be useful to time your drying to finish when you arrive
home from work, or to start when power rates are lower.
To 'Delay Start' your cycle:
Select the cycle.
1
Press 'Delay Start
2
Press
to confirm your selection and start the countdown.
3
The display will indicate the time until the cycle will start.
4
To decrease or turn off 'Delay Start':
Press 'Delay Start
1
Avoid using 'Delay Start' for damp, non-colourfast items as this may cause dye run to
occur.
Drying cycle options (DE7060M, DE6060M, DE5060M and DE5060MU models only)
All drying cycles default to the recommended options based on the average expected
load to be dried. You can vary the options ('Dryness Level', 'Dry Temp') to create your
desired cycle.
To change the cycle or options you have selected after a cycle has started:
Press
and select your new cycle or options, then press
z
Note: Some options may not be available for selection under certain conditions and
after particular stages of the drying cycle have passed.
DESCRIPTION
Dryness Level
When your dryer senses that the clothes
have dried to the dryness level selected,
the dryer will automatically finish the cycle.
Note: Two lights are used to show some
dryness levels, eg to achieve the 'Damp
Dry' setting both the 'Dry' and the 'Damp'
dry lights will be illuminated.
Dry Temp
There are four drying temperatures you
can choose from for your cycle.
26

CUSTOMISING DRYING CYCLE

' to cycle through the delay start times available.
' to cycle through the delay start times available.
again to resume drying.
OPTIONS
There are five dryness levels from
'Damp' through to 'Extra Dry'.
If you wish to change from the
default dryness, you can choose
the dryness level to suit your load
depending on how dry you wish
your items to be.
High: Clothes temperatures reach
up to 80°C.
Medium: Clothes temperatures
reach up to 70°C.
Low: Clothes temperatures reach
up to 45°C.
No heat: Cool air is blown through
the dryer for the period selected.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

De7060mDe5060mDe5060muDe4560mDe4560m2De6060m2

Table of Contents