Table of Contents
Advertisement
All drying cycles default to the recommended options for that cycle based on
the average expected load to be dried using that cycle. You can vary the options
(eg 'Dryness Level', 'Dry Temp') to create your desired cycle. Note: some options are
not available on some cycles, for clothes care reasons, or because the option is not
appropriate for the cycle.
To change a drying option or options you have selected after a cycle has started,
touch
and select your new setting, then touch
new setting or settings.
Note: some options may not be available for selection under certain conditions and after
particular stages of the drying cycle have passed.
Dryness Level
Your dryer takes the guess work out of choosing drying
times by sensing the dryness of the load. When your dryer
senses that the clothes have dried to the dryness level you
have selected, the dryer will automatically finish the cycle.
The dryer has five dryness levels from Damp through
to Extra Dry. Choose the dryness level to suit your load
depending on how dry you wish for your clothes to be.
If you find the load is not dry enough, select the next
dryness level up. The higher the level, the longer the
drying time and the drier your clothes will become.
Note: two lights are used to show some dryness levels.
For example, to achieve the Damp Dry setting both the
Dry and the Damp lights will be illuminated.
Airing/Cool down (Cool)
When the dryer has sensed that the load is dry it will
automatically go into a 10 minute airing or cool down
cycle. During 'Cool' the drum tumbles and cool air is
blown through the clothes. This cools the load to reduce
creasing if the clothes are left in the dryer.
Dry Temp
There are four drying temperatures you can choose from:
High: For regular to heavy cottons.
●
●
Medium: For synthetics, some blends and items labelled
●
●
Permanent Press.
Low: For delicates, synthetics and items labelled Tumble
●
●
Dry Low.
No Heat: This option may only be used with 'Air Dry' and
●
●
'Time Dry' in which items are tumbled without heat.
Touch the 'Dry Temp' button until the light next to your
desired drying temperature is illuminated.
DRYING CYCLE OPTIONS
again to resume the cycle with the
Dryness levels
Cool down mode
Dry temp
19
Advertisement
Table of Contents
