Getting Started Quickly - Fisher & Paykel DE6060M Installation Manual/User Manual

Lint
Some items are lint givers, while others are lint collectors. Always dry lint givers
and collectors separately.
LINT GIVERS
Towels
Flannelette sheets
Check the lint filter is clean before every load. Ensure it is replaced correctly before
z
using your dryer.
The lint filter indicator light will flash at the beginning of every cycle when the machine
z
is switched on, as a reminder to check the lint filter.
Sort and load items into the dryer drum, ensuring no items are in the way of the door.
z
Close the door.
Press 'POWER'
1
Your dryer will default to the 'Everyday' cycle. Select your desired drying cycle by
2
pressing the cycle button of your choice.
DE7060M, DE6060M, DE5060M and DE5060MU models only. Select your preferred
3
drying options, using the buttons on the right hand side of the panel (if you wish to
select options different from the default options for the cycle).
Press to start the cycle.
4
If you make an invalid selection the dryer will beep to alert you.
z
When the cycle finishes, your dryer will beep and then turn off automatically.
z
If you wish to change a cycle once drying has started, press
z
new cycle. Press
drying performance.
If you wish to stop the dryer before the cycle has finished you MUST remove
z
the clothes IMMEDIATELY and spread them out to cool. DO NOT leave the clothes
in the dryer or bunched up in a clothes basket. Take extreme care as the drum
and the load items may be extremely hot.
Failure to follow the advice in this guide may result in damage to your garments
z
and your expectations of drying performance may not be met.

GETTING STARTED QUICKLY

to activate your dryer.
to restart the dryer with the new cycle. This may affect
LINT COLLECTORS
Synthetics eg polar fleece
Corduroy
Polyester cottons
then select the
25