Replacing Damaged Drain Fitting - Hussmann Impact F6 Installation And Operation Manual

MAIN ELECTRICAL CONNECTIONS
The main case connection access is at the top left
end of the case.
Rear of Case

REPLACING DAMAGED DRAIN FITTING

The following procedure is for the field repair of a
broken drain fitting.
1. Use a drill with a 1
drill out the bottom of the drain fitting. Be sure to
drill completely through fitting and bottom liner.
Drain Fitting
Viewed from Inside Merchandiser
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
-in. (48 mm) hole saw to
7
/
8
2. Apply teflon tape to threaded end of adapter and
screw into threaded end of tee.
3. Apply an ABS and PVC compatible primer and
sealer to adapter and inside of drain. Insert adapter
into drain fitting.
Foam Bottom
Assembly
Modified
Drain Fitting
End Section View
Multi-deck Frozen Food
6-11
PVC Adapter
1 1
1 / x 1 /
2 4 inch
(38 x 32 mm)
(obtained at local
building supply store)
1
Tee 1 /
4 in.
TxSxS
(32 mm)
Low Temperature