Replacing Damaged Drain Fitting - Hussmann CW2U-138GE Installation And Operation Manual

P/N 428668A

REPLACING DAMAGED DRAIN FITTING

The following procedure is for the field repair of a
broken drain fitting.
1. Use a drill with a 1
drill out the bottom of the drain fitting. Be sure
to drill completely through fitting and bottom
liner.
Drain Fitting
Viewed from Inside Merchandiser
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
7 -in. (48 mm) hole saw to
/
8
2. Apply teflon tape to threaded end of adapter
and screw into threaded end of tee.
3. Apply an ABS and PVC compatible primer
and sealer to adapter and inside of drain. Insert
adapter into drain fitting.
Foam Bottom Assembly
Modified
Drain Fitting
PVC Adapter
1 1
1 / x 1
2
(38 x 32 mm)
(obtained at local building supply store)
End Section View
Medium Temperature
1
Tee 1 /
4 in.
TxSxS
(32 mm)
/
4 inch
6-5