Attach Nut With Nut Holder On The Basic Frame （16 Locations; Build Basic Frame On The Stand Base - PreXion PreXion3D Excelsior Service Manual

3-5. Attach NUT with NUT HOLDER on the BASIC FRAME （16 locations ）
Caution:
BASIC FRAME has top and bottom direction.
On the top surface, screw holes are tapped for the STAND
PLATE TOP.
16 locations for NUT and NUT HOLDER
for STAND BRACKET MIDDLE
( 2 x 2 = 4 )
for WALL PLATE
( 4 )
for STAND BRACKET BOTTOM
( 2 x 4 = 8 )

3-6. Build BASIC FRAME on the STAND BASE

Attach HEAVY BRACKET at bottom with HEAVY BRACKET tentatively( 16 screws ).
Remember the BASIC FRAME has top/bottom direction.
XTR-PX2-C0006-IN004 Stand
Screw Bag B
Screw Bag B
Screw Bag D
BASIC FRAME
HEAVY BRACKET (4)
STAND BASE
Attach the HOLDER at the NUT and insert them
in the ditch in the surface. And slide them to the
proper location.
Place NUT in the upper side ( surface side ) on
the HOLDER.
Screw Bag G
screw holes on the top
60 mm
Screw Bag C
Screw Bag D
960 mm
882 mm
BASIC FRAME edge
6