Connecting Cables (1) And Fixing - PreXion PreXion3D Excelsior Service Manual

2.12 Connecting Cables (1) and Fixing

Connect the cables on the top of the FPD unit, and press the connector into the CEPHALO ARM.
There are 4 cables to be pushed in.
Secure the USB 3.0 cable connector part (not the cable part) with a cable tie.
Cut off the extra length of the cable tie.
* In order to prevent the metal part of the USB connector from contacting the metal part inside the device, the
connector part of the USB 3.0 cable is secured.
XTR-PX2-C0006-IN004 Ceph option
Connect the cables, and press
the connector into the CEPHALO
ARM.
Secure the connector part
Cut off the extra length
2-9