Confirming Stand-Alone Operation (Control Panel Operation) - PreXion PreXion3D Excelsior Service Manual

5. Confirming stand-alone operation
(Control panel operation)
1.
Check that the emergency stop switches (x2)
have been released, and power on the scanner.
2.
Press and hold the button of the LCD.
3.
Enter the password and press the "Confirm"
button.
4.
Operate all buttons to check that the Scanner
works properly.
After checking, switch off the system switch on
the SWITCH Box and power off the device.
XTR-PX2-C0006-IN004 5-1