Attaching Fpd Unit - PreXion PreXion3D Excelsior Service Manual

2.11 Attaching FPD Unit

Take out FPD from the packing box, and cut off the cable tie.
Attach the FPD unit and secure it with the CP5X12-I3-CM1 (x2) (Screw bag E).
* Be careful not to let the FPD fall during work.
* To prevent the FPD surface from being scratched, install the FPD as it is wrapped around the cushion seat.
* When attaching the FPD unit, pull out the cables before starting the work so that the cables on top of the
FPD unit do not get pinched.
* It is easier to attach the FPD unit while checking from the top.
XTR-PX2-C0006-IN004 Ceph option
Cut off the cable tie
Pull out the cables CP5X12-I3-CM1
CP5X12-I3-CM1
2-8