Attaching Cephalo Arm Base - PreXion PreXion3D Excelsior Service Manual

2.4

Attaching CEPHALO ARM BASE

Aligning with the positioning pin, attach the CEPHALO ARM BASE to the Gantry with the CP8X30-CM1 (x4)
(Screw bag F).
Tighten the tilt adjustment screw CP8X30-CM1 (x1) (Screw bag F) of the CEPHALO ARM.
CEPHALO ARM BASE
CP8X30-CM1
Align with positioning pin
XTR-PX2-C0006-IN004 Ceph option
CP8X30-CM1
2-2