Building Console - PreXion PreXion3D Excelsior Service Manual

2. Building Console

Build Console with taking care the following points.
In case of V1.3.1.0 and later
XTR-PX2-C0006-IN004 Console and Software
HASP key should be inserted to the back side USB port.
Insert it to the USB 2.0 port.
LAN cable should be inserted to LAN port on the NIC.
( Not on the Mother board but on the NIC )
Monitor cable should be inserted to the far left port of the
upper M2000 board.
( There are two M2000 boards in Console PC. )
PC monitor cable should be connected
to the far left port of the lower M2000 board.
In V1.3.1.0 and later, as we use the upper
M2000 only for working memory for the
Viewer software, the video i/f function does
not work.
3