Building The Device - PreXion PreXion3D Excelsior Service Manual

3. Building the device

The flow of assembling the device and the time it takes for each step are shown below.
No.
3.1 Setting up the PILLAR
3.2 Attaching the Stationary Arm
3.3 Attach the SENSOR BASE
3.4 Wiring to the SWITCH Box
3.5 Attaching the SWITCH Box
3.6 Attaching the cover (FIXED COVER BOTTOM only)
3.7 Attaching the Rotation Arm
3.8 Attaching the Chin Rest Arm
3.9 Attaching the LCD
3.10 Attaching Cephalometric Sensor Unit (optional)
● Tool
- Torque wrench (hexagonal hole diameter : 10mm, 6mm, 5mm)
- Phillips head screwdriver
- Flat-blade screwdriver
XTR-PX2-C0006-IN004
Work Required time
3-1