Step-5: Update Scanner Software - PreXion PreXion3D Excelsior Service Manual

Step-5: Update Scanner software

On the LCD panel, click "SCANNER" button,
( or On the Tight VNC screen Click "SCANNER" button. )
The scanner unit will restart automatically after updating the Scanner software, and VNC connection will break.
In case of V1.4.0.0 or later, please wait
( "Now updating ..." message appears the first 30 secconds, after that, many messages and screens
appear and disappear during next 50 seconds. And finally you will see "Please reboot" screen. )
Then turn off/on the power of the scanner unit.
XTR-PX2-C0006-IN004 Console and Software
80 secconds
unitil you see the following screen on LCD.
13