Connecting Cables (2) - PreXion PreXion3D Excelsior Service Manual

2.13 Connecting Cables (2)

Wire the CEPHALO ARM cables from the back through the side (pass through the hole on the CEPHALO ARM
BASE).
Connect the four cables (NO.86, NO.91, NO.22, USB cable)
A-VALUE board
Connect to the USB
connector on the upper tier
XTR-PX2-C0006-IN004 Ceph option
Connect to the connector on the top of the DC/DC board
* In front of DC/DC board, the PC sheet has been attached.
Remove the PC sheet, and then connect the connector.
NO.91
NO.22
NO.86
Wire the cables
2-10