TechniSat DIGITRADIO 602 Manual page 71

> Select Manual settings, if you know your network parameters and you would
like to configure them manually. Take note of the instructions on the display.
> Select Delete network profile, to delete connections no longer required.
> Under NetRemote PIN you can configure a PIN for remote access (e.g. with
the TechniSat CONNECT app).
> Select Allow WLAN connection in standby mode if the WLAN connection
should be retained in standby mode as well. This setting increases power
consumption but enables App control via the TechniSat CONNECT app.
18.3 Time settings
> Press the MENU button and then select [Main Menu > System Settings >
Time and Date].
> Select [Time/Date Setting] to set the time and date manually.
Use the  or  buttons to select a value. Change it using the  or 
buttons.
> Confirm by pressing OK.
> Select [Update setting] to determine whether the time update should be
automatic via DAB, FM or Internet or whether you would like to enter it
manually.
> To do this, select [DAB+ update], [FM update], [NET update] or [No
update].
> Under the Set format option you can activate 12 or 24 hour format. Confirm
your selection with the OK button.
> Under [Set time zone], select the current time zone in your location (only for
Internet updating).
> Under [Summertime] you specify whether summertime should currently be
active.
18.4 Language
> Press the MENU button and then select [Main Menu > System Settings >
Language].
> Using  or , select the language and confirm the selection by pressing OK.
DE DE
EN EN
FR FR
NL NL
71