Advertisement
the feed vat. If there is cured resin, please clean it. If it's not solidified, after removing
the material vat and printing build plate, use the "light path control" function of the
printer to check whether the display screen is normallyoutput.
2. Cleaning method of imaging screen: use dust-free cloth to wipe, and do not use
alcohol or other corrosive solutions.
3. The imaging screen is a vulnerable part to ensure that no sharp objects collide
with the screen and cause fragmentation.
4. When the build plate is moved, make sure there are no solid impurities in the
middle when the build plate is pressed with the screen.
5. Please ensure that there are no solid particles and sundries in the feed vat before
each printing.
6. The power on button can be used for emergency stop function.
7. Strong sunlight will cause curing of printing materials. Avoid direct sunlight on
resin materials when operating printer.
After using
1. Rust prevention
If the printer is not in use for a long time, the guide rail of the printer should be
added with anti-rust oil, so as to avoid rusting and reduce the printing accuracy and
abnormal use of the printer.
2. Printer placement environment
If the printer
is
not
in
use
for
a
long
time,
please
store
it
in
a
clean, dry
and
55
Advertisement
