Advertisement
Filling resin material
1. Shake the material inside the bottle before pouring it into the resin material of the
trough every time ，when we poured out ,we should ensure the uniform density of
the material .
2. Before inverting the resin material into the trough, please confirm that there is no
obvious solid impurities in the trough;
3. After wearing the protective gloves, goggles and mask, pour the resin material into
the trough; (the amount of resin material pouring according to the level of the trough)
1. Keep the printer door closed, if there is any resin material in the vat.
Warning: When there is resin material in the vat, it is forbidden to open the
cabin door frequently to prevent daylight curing.
4.Software introduction
Software overview
The main function of the slicing software is to convert the model file into the slice
format required for 3D printer processing, it includes simple model editing functions
(such as scaling, rotation, mirror symmetry, model copying, etc.) and auxiliary
processing (such as automatic layout, automatic support, etc.) and other functions.
Jiangsu Ouring 3D Technology co.,Ltd
19
Advertisement
