Advertisement
[Local file] is stored in the model print file of the printer. All files
printed by the printer will be stored in this
[Udisk file] After the USB disk is inserted into the printer, the print
model file will be recognized by the
Operate the related selected files by using the [Print], [Pause], [Stop],
and [Delete] buttons.
Set interface
[Network] controls the printer through the LAN. (Development tools
are not supported for use current now.)
[Language] Users can set the language version of the printer to a
localized
language；
[Material Vat Clean] When there are many impurities in the bottom of
the printer resin vat, this function can be used to cure the resin at the
bottom of the vat, solidify the impurities and remove the cured
Jiangsu Ouring 3D Technology co.,Ltd
location.；
printer；
9
resin.；
Advertisement
