Resin Vat Release Film Replacementinstruction - 3DTALK DF100 User Manual

impurities, please use the vat cleaning function. The solid impurities in the resin vat
must be cleaned up before printing the secondary model.
Note: Do not use metal spatula when cleaning or inspecting solid impurities
in the vat, in case of cutting the release film and causing leakage phenomenon
occurrence, using the function of vat cleaning, the material at the bottom of the vat
will be solidified into a block, and the solidified block will be taken out with a plastic
scraper, after taking out the solidified block, clean it again through the plastic
scraper along the release film of the bottom surface of the resin vat to ensure that
there is no residue in the resin vat.

6. Resin vat release film replacementinstruction

Release liner
Solution A:
1. Pour the resin material that needs to be replaced in the release membrane vat into
a clean resin storage container and seal it up and lean the vat withalcohol
screw
51
Squeeze
Film box