Advertisement
[Operation Control] Controls the Z-axis of the printing build plate to
move up & down and return to
Note: The bottoming operation in Operation Control must confirm that there
is no solid impurities inside the printing build plate and resin vat. It can be
operated after being leveled。
[Light Path Control]
[Water Cooled Switch] Manually turn on the water-cooling system of
the
printer；
[Light board switch] manually open the LED light
[Preset Image] Calibrate the light intensity
[Full Screen Image] Check whether the screen is damaged or
[Setting]
[Administrator Login] Enter the parameter login password:
[Parameter] User can set the printing parameters in printer (draw "√
in [Parameter Settings] and save, the model file will be printed
according to the parameters of this page, and the printing
parameters set in the software will be invalid.)
[Parts Replace] Count the use time of the lamp board and screen.
When it needs to be replaced, please click the corresponding
button to time the
[Light Calibration] Calibrates the light intensity of the light board.
Jiangsu Ouring 3D Technology co.,Ltd
zero；
parts.；
10
board；
pattern；
123456；
not。
Advertisement
