Advertisement
2. Remove the screws at the bottom of the vat with a screwdriver, take out the lower
die frame and release film, and remove the residue in the die frame cleanup
3. Lay the new release film and press die frame on the bottom of the vat and use the
original screw to press evenly (Screw away One-time fastening)
4 Release film compression, use wallpaper knife around the excess release film paper
cut off
5. Pour a little clean water into the material vat for leakage test. After detecting no
leakage point, pour out the water and dry it with a dust-free clean vat
6. Complete vat release film replacement. (Printing of the model in the same position
on the build plate for a long time frequently will cause the release film to be blurred,
so as to ensure the printing quality and success. When printing every time, please do
not frequently print in the same location)
Solution B:
1.Replace the whole set of vat (including vat+ release film) (If you want to know
details, please contact the sales representative and the manufacturer's after-sales
staff)
3DTALK spare parts link:
https://list.tmall.com/search_product.htm?q=3dtalk&type=p&vmarket=&spm=875.7931836%
2FB.a2227oh.d100&from=mallfp..pc_1_searchbutton
Resin vat
52
Advertisement
