Advertisement
The pole widening factor
The position above 0
Internal support is starting
Feet high
Use absolute size
Top of the feet in diameter
Sole of the feet in diameter
Add base plate support
Thickness
Jiangsu Ouring 3D Technology co.,Ltd
defaults to 2.0
Click √to enable this function, Edit the
spacing of the model anomaly when
supporting
click √ to enable this function ， This
fuction is enabled by default
The default of 1.0 mm
Click √ to enable this feature ，
feature is not enabled bydefault
4.0
6.0
Click √ to enable this feature ，
feature is enabled bydefault
The default 1.0
37
This
This
Advertisement
