Advertisement
DEALER PRE-DELIVERY CHECK LIST
After the Forage Box has been completely set-up, check to be certain it is in correct running
order before delivering to the customer. The following is a list of points to inspect. Check off each
item as you have made the proper adjustments and found the item operating satisfactorily.
___
Forage Box was not damaged in shipment. Check for dents and loose or missing parts.
Report damage immediately to H&S Manufacturing Co., Inc
____ Forage Box has been correctly assembled according to instructions in this manual.
____ All Shields and Guards are in place and fastened.
____ All Grease Fittings have been lubricated. See lubrication guide in this manual.
____ Hoses & fittings if applicable, are properly attached and there are no visible leaks.
____ All Mechanisms are operating trouble free.
____ All Roller Chains are at proper tension.
____ Apron Chains are adjusted properly.
____ All Bolts and Fasteners are tight.
____ All Decals are in place and legible.
(Signature of Pre-Delivery Inspector)
DEALER DELIVERY CHECK LIST
This check list that follows is an important reminder of valuable information that should be passed on
to the customer at the time this Power Box is delivered.
Check off each item as you explain it to the customer.
This pre-delivery check list, when properly filled out and signed assures the customer that the
pre-delivery service was satisfactorily performed.
____ Explain to the customer that the pre-delivery inspection was made.
____ Explain to the customer all the safety precautions they must exercise when operating this unit.
____ Explain recommended loads for different types of materials.
____ Explain to customer that regular lubrication is required for proper operation and long life of machine.
____ Show customer the lubrication section of Owner's Manual.
____ Give the customer Owner's Manual and make sure he reads and understands all operating and
service instructions.
____ Have customer sign a completed "Warranty Registration,'' and mail it promptly.
Dealer's Name ______________________________
By ________________________________________
Signature of Original Buyer ________________________________________
Note: Warranty is not valid until warranty card is completed and returned to H&S Mfg. Co., Inc.
(Dealer's Name)
-3-
Model Number
Serial Number
(Inspection Date)
Date Delivered ________________________
Advertisement
