Advertisement
Check entire unit carefully before first operation. Tighten bolts, set screws, and chains which
might have come loose in handling. Run the unloading mechanism for several minutes. This will serve
as a break-in and as a check that all parts are assembled and lubricated properly. Successful operation
will be achieved by periodic adjustments and experience of the operator. Make sure to read and
understand the main feeder apron adjustments.
Located on the front of the Wide Body
Box is a convenient hanger (Item A) for
the hydraulic hoses. When the Wide
Body Box is not being unloaded, hoses
should be securely wrapped around
this holder, with ends inserted into
Block Holder (Item B). (Running Gear
and Chassis Mount Only).
BEFORE OPERATION
B
A
-8-
Mounting Socket For SMV Emblem (A)
Red Reflective Tape (B)
WHEN TRANSPORTING ON THE HIGHWAY
OR ROADS, PLACE SMV SIGN IN SOCKET
PROVIDED AND REGULARLY CLEAN THE
REFLECTIVE TAPE AT THE REAR OF THE
POWER BOX.
NOTE: Obey all state and local laws, concern-
ing towed equipment, on public roads.
Advertisement
