H&S H D 7+4 FEEDER BOX Operator's Manual And Parts List page 15

There are 21 grease fittings on your new H&S 7+4 Feeder Box.
Grease daily during normal use and before and after storage.
Use a good grade of high quality grease.
A. (2) One at each end of brace - gearbox to main drive shaft
B. (4) Beater Bearings - one at each end of beaters
(sealed bearings - do not overgrease)
C. One on left hand drive shaft bushing
D. One on sprocket type chain tightener - beater drive chain
E. (2) Remote fittings for right hand and center main drive shaft bushings
F. (4) One on each rear main apron idler sprocket
G. One on cross conveyor drive shear hub
H. (4) One on each wheel hub
I. (2) One on each walking beam pivot tube
B
E A
LUBRICATION GUIDE
D
G
F
(Continued)
-15-
C
B
H
I