Table of Contents
Advertisement
Figure 71. BIOS setting
Table 12. LAN LED behavior for both LAN ports
OS
Ubuntu Linux
LED[1]: 0110
LED[0]: 0001
Intel PSE
LED[1]: 0011
LED[0]: 0000
NOTE:
The Ubuntu Linux LED behavior requires a kernel version 5.13.0-1014-intel or later.
NOTE:
The x.x.x-10xx-intel kernel is only for the Ubuntu-specific version released by Dell.
Configure the WiFi network
About this task
Use the following commands to connect an AP using a WiFi interface (wlp2s0).
Steps
1. Scan APs:
$ nmcli dev wifi list
72
Setting Up the Ubuntu Operating System
LAN controller
1 G/100 MbE
LED[1]
enp0s29f1 and
Link: solid green
enp0s29f2
No-Link: off
Traffic: blink green
No traffic: off
1 G/100 MbE
10 MbE
LED[0]
LED[1]
No traffic: solid
Off
yellow
Traffic: blink
yellow
No traffic: solid
Traffic: blink green
yellow
No traffic: off
Traffic: blink
yellow
10 MbE
LED[0]
No traffic: solid
yellow
Traffic: blink
yellow
Link: solid yellow
Advertisement
Table of Contents
