Dell Command | Configure (Dcc) - Dell Edge Gateway 3002 Installation And Operation Manual

3. Copy the firmware.cab file to /root/snap/uefi-fw-tools/common/ folder.
$ sudo cp firmware.cab /root/snap/uefi-fw-tools/common/
4. Check the details of the BIOS from the .cab file.
$ sudo uefi-fw-tools.fwupdmgr get-details [Full path of firmware.cab]
5. Apply the update.
$ sudo uefi-fw-tools.fwupdmgr install [Full path of firmware.cab] -v
6. Restart the system.
$ sudo reboot
With an internet connection
1. Connect and login to the Edge Gateway.
NOTE: Connect and login to the Edge Gateway with one these options:
• Remote system configuration
• Static IP configuration
2. Check the current BIOS details.
$sudo uefi-fw-tools.fwupdmgr get-devices
3. Check if the update is available from LVFS service.
$sudo uefi-fw-tools.fwupdmgr refresh
4. Download the BIOS from the www.dell.com/support.
$sudo uefi-fw-tools.fwupdmgr get-updates
5. Apply the update.
$sudo uefi-fw-tools.fwupdmgr update -v
6. Restart the system.
$ sudo reboot

Dell Command | Configure (DCC)

Use DCC to update and configure the BIOS settings.
For more information on how to use DCC, see the DCC Installation Guide and User's Guide at
dellclientcommandsuitemanuals.
For more information about BIOS settings on the Edge Gateway, see
Edge Device Manager (EDM)
BIOS can be updated remotely through the EDM console connected to a remote system.
For more information about EDM, see
manager/research.
66
(only for Edge Gateway 3001 and 3002)
(only for Edge Gateway 3002 and 3003)
www.dell.com/support/home/us/en/19/product-support/product/wyse-cloud-client-
www.dell.com/
Default BIOS settings.