Table of Contents
Advertisement
Introduction
1-2
behavior of the DUT (device under test) in response to certain error
conditions.
For more detailed analysis, the PTC provides a connector to Agilent's
E2960 protocol analyzer. With the analyzer, you can monitor and analyze
captured PCI Express traffic between an adapter card and a system, for
example.
Further features include
• Field-upgradeable FPGA-based card
• USB 2.0 interface for programming and topology simulation mode
• Can act either as a PCI Express standalone add-in card, or as a PCI
Express interposer card for x1 operation
• Card supplied with two different software packages:
The AIC test mode software which runs under Linux Operating
–
system with the PCI Express compliance tests for Add-In-Cards
A windows software package that contains the AIC Tests for
–
Windows as well as the Topology Tests. This package contains also
some additional tools for checking and updating the Protocol Test
Card, which runs under Windows via the USB connector.
E2969-91020
Test Modes
Advertisement
Table of Contents
