Table of Contents
Advertisement
Installing the Software
E2969-91020
To install the target platform software:
1 Power up the target platform.
2 When Linux is being booted, start the uni-processor kernel.
At a multi-processor system, you are queried to select the kernel.
3 Log in to the system as root.
4 Open a terminal window to start installation.
5 Enter mount /mnt/cdrom to mount the CD-ROM drive.
6 Insert the PTC CD and enter the following command in the terminal
window: tar xvzf /mnt/cdrom/ptcgui-1.0.0.tar.gz.
7 Enter cd ptcgui-1.0.0.
In this directory, you will find the files install.sh and a README.TXT.
Check the readme file for latest information.
8 Enter ./install.sh to start the installation.
The target platform software (graphical user interface) for controlling the
tests is now ready to run.
After installation, make sure that the directory /usr/local/bin is included
in your path variable.
Installation
2-5
Advertisement
Table of Contents
