Table of Contents
Advertisement
Testing the Installation
E2969-91020
• To test the communication between the PTC and the controlling host
PC, connect both devices using the USB cable and use the
"Maintenance" menu entry to retrieve a status message.
Windows AIC Drivers
1 Go to Control Panel->System->Hardware->Device Manger
2 Select System Devices. Look for 2 "Intel(R) Protocol Test Card PCI-to-
PCI bridge" Devices with following PCI bus numbers and a "PCIE
Configuration Space Access Tool" Device. Be sure, that there are no
exclamation marks on this Devices. It should look like this:
Installation
2-11
Advertisement
Table of Contents
