Table of Contents
Advertisement
Important Notice
© Agilent Technologies, Inc. 2004
Manual Part Number
E2969-91020
Revision
Revision 2.0, December 2004
Printed in Germany
Agilent Technologies,
Deutschland GmbH
Herrenberger Str. 130
71034 Boeblingen, Germany
Warranty
The material contained in this
document is provided "as is," and is
subject to being changed, without
notice, in future editions. Further, to
the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or
implied, with regard to this manual
and any information contained
herein, including but not limited to
the implied warranties of
merchantability and fitness for a
particular purpose. Agilent shall not
be liable for errors or for incidental
or consequential damages in
connection with the furnishing, use,
or performance of this document or
of any information contained herein.
Should Agilent and the user have a
separate written agreement with
warranty terms covering the
material in this document that
conflict with these terms, the
warranty terms in the separate
agreement shall control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may
be used or copied only in
accordance with the terms of such
license.
Restricted Rights Legend
If software is for use in the
performance of a U.S. Government
prime contract or subcontract,
Software is delivered and licensed
as "Commercial computer software"
as defined in DFAR 252.227-7014
(June 1995), or as a "commercial
item" as defined in FAR 2.101(a) or
as "Restricted computer software"
as defined in FAR 52.227-19 (June
1987) or any equivalent agency
regulation or contract clause. Use,
duplication or disclosure of
Software is subject to Agilent
Technologies' standard commercial
license terms, and non-DOD
Departments and Agencies of the
U.S. Government will receive no
greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2)
(June 1987). U.S. Government users
will receive no greater than Limited
Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015
(b)(2) (November 1995), as
applicable in any technical data.
E2969-91020
Safety Notices
C AUT ION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or the
like that, if not correctly performed
or adhered to, could result in
damage to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until the
indicated conditions are fully
understood and met.
W ARN IN G
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or the
like that, if not correctly performed
or adhered to, could result in
personal injury or death. Do not
proceed beyond a WARNING notice
until the indicated conditions are
fully understood and met.
Specific Cautions
Do not use the test card for any
other purposes or in any other way
than described in this manual.
The test card may become hot
during use. Do NOT touch any of the
components on the test card. Do
NOT place the test card on
flammable surfaces during or after
operation.
Trademarks
Windows®, Windows 2000®, and
Windows XP® are U.S. registered
trademarks of Microsoft
Corporation.
Safety Symbols on the E2969A:
Indicates that antistatic precautions
should be taken.
Indicates hot surfaces, please do not
touch.
This product complies with the
relevant legal directives.
Advertisement
Table of Contents
