Table of Contents
Advertisement
Installing the Software
E2969-91020
Bridges and no DUT is plugged in.
To ensure if the PTC is installed as 2 PCI-to-PCI Bridges, do following:
1 Go to Control Panel->System->Hardware->Device Manger
2 Select System Devices. Look for 2 "PCI standard PCI-to-PCI bridge"
Devices with following PCI bus numbers. It should look like this:
If you install only the AIC tests and drivers it may be useful to install the
USB-Driver for maintenance
Installation
2-7
Advertisement
Table of Contents
