Table of Contents
Advertisement
Administering the PTC
E2969-91020
integrety issues within the PTC. Use this if you are unsure if the PTC
might have a hardware issue.
• SWITCH TO AIC MODE: This switches the PTC to AIC mode and
programs the PTC to come up in AIC mode with any further power up
event.
• SWITCH TO TOPO MODE: This switches the PTC to Topology Test
mode and programs the PTC to come up in Topology Test mode with
any further power up event.
• SWITCH TO KEP MODE: This switches the PTC to Known Endpoint
(KEP) test mode and programs the PTC to come up in KEP mode with
any further power up event. The KEP mode will be supported with one
of the next releases.
NOT E
The firmware version is also briefly displayed on the four-digit display
when the PTC powers up (for example, "V123" means version 1.23).
Working with the PTC
3-11
Advertisement
Table of Contents
