Show Ssl-Proxy Natpool - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

show ssl-proxy natpool

To display information about the NAT pool, use the show ssl-proxy natpool command.
Syntax Description name
context name
Defaults This command has no default settings.
Command Modes EXEC
Command History Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
SSL Services Module
Release 3.1(1)
Examples This example shows how to display information for a specific NAT address pool that is configured on
the SSL Services Module:
ssl-proxy# show ssl-proxy natpool
No context name provided, assuming context 'Default'...
natpool-name
n1
ssl-proxy#
This example shows how to display information for a specific NAT address pool that is configured on
the SSL Services Module:
ssl-proxy# show ssl-proxy natpool n1
No context name provided, assuming context 'Default'...
Start ip: 207.57.110.1
End ip: 207.57.110.8
netmask: 255.0.0.0
vlan associated with natpool: 2
SSL proxy services using this natpool:
Num of proxies using this natpool: 2
ssl-proxy#
Related Commands natpool
OL-9105-01
show ssl-proxy natpool [name][context name]
(Optional) NAT pool name.
(Optional) Context name.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
This command was changed to add the context name keyword.
start-ip
207.57.110.1
S2
S3
end-ip
207.57.110.8
Catalyst 6500 Series Switch SSL Services Module Command Reference
show ssl-proxy natpool
netmask use-count
255.0.0.0 2
2-71