Policy Tcp - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

policy tcp

To enter the proxy policy TCP configuration submode, use the policy tcp command. In proxy-policy
TCP configuration submode, you can define the TCP policy templates.
Syntax Description tcp-policy-name
Defaults
The defaults are as follows:
•
•
•
•
•
•
•
•
•
•
•
Command Modes
Context subcommand mode
Command History Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
SSL Services Module
Release 1.2(1)
SSL Services Module
Release 2.1(4)
SSL Services Module
Release 3.1(1)
OL-9105-01
policy tcp tcp-policy-name
TCP policy name.
buffer-share rx is 32768 bytes.
buffer-share tx is 32768 bytes.
delayed-ack-threshold is 2.
delayed-ack-timeout is 200 seconds.
mss is 1460 bytes.
nagle is enabled.
timeout syn is 75 seconds.
timeout reassembly is 60 seconds.
timeout inactivity is 600 seconds.
timeout fin-wait is 600 seconds.
tos carryover is disabled.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
This command was changed to add the timeout reassembly time
subcommand.
This command was changed to add the tos carryover subcommand.
The policy tcp command (entered in context subcommand mode)
replaces the ssl-proxy policy tcp command (entered in global
subcommand mode).
This command was changed to add the following submode commands:
forced-ack
•
nagle
•
Catalyst 6500 Series Switch SSL Services Module Command Reference
policy tcp
2-45